A graphite capping layer has been evaluated to protect the surface of patterned and selectively implanted 4H–SiC epitaxial wafers during post-implantation annealing. AZ-5214E photoresist was spun and baked in vacuum at temperatures ranging from 750 to 850 °C to form a continuous coating on both planar and mesa-etched SiC surfaces with features up to 2 µm in height. Complete conversion of the hydro...
PAM-XIAMEN grows high quality Gallium Antimonide (GaSb) single crystal ingots. We also round, saw cut, lap and polish GaSb wafers and can supply an epi-ready surface quality. GaSb crystal is a compound formed by 6N pure Ga and Sb element and is grown by Liquid Encapsulated Czochralski ( LEC ) method with EPD < 1000 cm -3 . GaSb crystal has high uniformity of electrical parameters and low defect...
Xiamen Powerway Advanced Material Co.,Ltd., a leading supplier of Epi service for GaAs-based laser wafers growth and other related products and services announced the new availability of size 3” is on mass production in 2017. This new product represents a natural addition to PAM-XIAMEN's product line. Dr. Shaka, said, "We are pleased to offer Quantum Well Laser Structure to our custome...
We present a novel process for integrating germanium with silicon-on-insulator (SOI) wafers. Germanium is implanted into SOI which is then oxidized, trapping the germanium between the two oxide layers (the grown oxide and the buried oxide). With careful control of the implantation and oxidation conditions this process creates a thin layer (current experiments indicate up to 20-30nm) of almost pure...
We investigated the transition energy levels of the vacancy defects in gallium nitride by means of a hybrid density functional theory approach (DFT). We show that, in contrast to predictions from a recent study on the level of purely local DFT, the inclusion of screened exchange stabilizes the triply positive charge state of the nitrogen vacancy for Fermi energies close to the valence band. On the...
A micromachined AlGaN/GaN high-electron-mobility transistor (HEMT) on a Si substrate with diamondlike carbon/titanium (DLC/Ti) heat-dissipation layers was investigated. Superior thermal conductivity and thermal expansion coefficient similar to that of GaN enabled DLC/Ti to efficiently dissipate the heat of the GaN power HEMT through the Si substrate via holes. This HEMT with DLC design also mainta...
Direct diode lasers have some of the most attractive features of any laser. They are very efficient, compact, wavelength versatile, low cost, and highly reliable. However, the full utilization of direct diode lasers has yet to be realized. The poor quality of diode laser beam itself, directly affect its application ranges, in order to better use of diode laser stack, need a proper correction of op...
An InAs/Si heterojunction formed by a wet wafer bonding method with an annealing temperature of 350 °C was investigated by transmission electron microscopy (TEM). InAs and Si were observed to be uniformly bonded without any voids in a 2-µm-long field of view in a bright-field TEM image. A high-resolution TEM image revealed that, between the InAs and Si lattice images, there existed a transition la...
Contact Information
luna@powerwaywafer.compowerwaymaterial@gmail.com 
+86-592-5601 404
