Using plasma enhanced chemical vapor deposition (PECVD) at 13.56 MHz, a seed layer is fabricated at the initial growth stage of the hydrogenated microcrystalline silicon germanium (μc-Si1−xGex:H) i-layer. The effects of seeding processes on the growth of μc-Si1−xGex:H i-layers and the performance of μc-Si1−xGex:H p—i—n single junction solar cells are investigated. By applying this seeding method, ...
Orthogonal experiments of GaSb films growth on GaAs substrate have been designed and performed by using a low-pressure metal–organic chemical vapor deposition (LP-MOCVD) system. The crystallinities and microstructures of the produced films were comparatively analyzed to achieve the optimum growth parameters. It was demonstrated that the optimized GaSb thin film has a narrow full width at half maxi...
For homogeneous materials, the ultrasonic immersion method, associated with a numerical optimization process mostly based on Newton's algorithm, allows the determination of elastic constants for various synthetic and natural composite materials. Nevertheless, a principal limitation of the existing optimization procedure occurs when the considered material is at the limit of the homogeneous hypothe...
A contactless non-destructive imaging method for spatially resolved dopant concentration, [2.2] N d, and electrical resistivity, ρ, of n- and p-type silicon wafers using lock-in carrierography images at various laser irradiation intensities is presented. Amplitude and phase information from wafer sites with known resistivity was employed to derive a calibration factor for accurate determination of...
Contact Information
luna@powerwaywafer.compowerwaymaterial@gmail.com 
+86-592-5601 404
