A graphite capping layer has been evaluated to protect the surface of patterned and selectively implanted 4H–SiC epitaxial wafers during post-implantation annealing. AZ-5214E photoresist was spun and baked in vacuum at temperatures ranging from 750 to 850 °C to form a continuous coating on both planar and mesa-etched SiC surfaces with features up to 2 µm in height. Complete conversion of the hydro...
PAM-XIAMEN grows high quality Gallium Antimonide (GaSb) single crystal ingots. We also round, saw cut, lap and polish GaSb wafers and can supply an epi-ready surface quality. GaSb crystal is a compound formed by 6N pure Ga and Sb element and is grown by Liquid Encapsulated Czochralski ( LEC ) method with EPD < 1000 cm -3 . GaSb crystal has high uniformity of electrical parameters and low defect...
Wafer-scale arrays of well-ordered Pb(Zr0.2Ti0.8)O3 nanodiscs and nanorings were fabricated on the entire area (10 mm × 10 mm) of the SrRuO3 bottom electrode on an SrTiO3 single-crystal substrate using the laser interference lithography (LIL) process combined with pulsed laser deposition. The shape and size of the nanostructures were controlled by the amount of PZT deposited through the patterned ...
Xiamen Powerway Advanced Material Co.,Ltd., a leading supplier of Epi service for GaAs-based laser wafers growth and other related products and services announced the new availability of size 3” is on mass production in 2017. This new product represents a natural addition to PAM-XIAMEN's product line. Dr. Shaka, said, "We are pleased to offer Quantum Well Laser Structure to our custome...
We present a novel process for integrating germanium with silicon-on-insulator (SOI) wafers. Germanium is implanted into SOI which is then oxidized, trapping the germanium between the two oxide layers (the grown oxide and the buried oxide). With careful control of the implantation and oxidation conditions this process creates a thin layer (current experiments indicate up to 20-30nm) of almost pure...
We investigated the transition energy levels of the vacancy defects in gallium nitride by means of a hybrid density functional theory approach (DFT). We show that, in contrast to predictions from a recent study on the level of purely local DFT, the inclusion of screened exchange stabilizes the triply positive charge state of the nitrogen vacancy for Fermi energies close to the valence band. On the...
Direct wafer bonding technology is able to integrate two smooth wafers and thus can be used in fabricating III–V multijunction solar cells with lattice mismatch. In order to monolithically interconnect between the GaInP/GaAs and InGaAsP/InGaAs subcells, the bonded GaAs/InP heterojunction must be a highly conductive ohmic junction or a tunnel junction. Three types of bonding interfaces were designe...
A micromachined AlGaN/GaN high-electron-mobility transistor (HEMT) on a Si substrate with diamondlike carbon/titanium (DLC/Ti) heat-dissipation layers was investigated. Superior thermal conductivity and thermal expansion coefficient similar to that of GaN enabled DLC/Ti to efficiently dissipate the heat of the GaN power HEMT through the Si substrate via holes. This HEMT with DLC design also mainta...
Contact Information
luna@powerwaywafer.compowerwaymaterial@gmail.com 
+86-592-5601 404
