It is still a great challenge for semiconductor based-devices to obtain a large magnetoresistance (MR) effect under a low magnetic field at room temperature. In this paper, the photoinduced MR effects under different intensities of illumination at room temperature are investigated in a semi-insulating gallium arsenide (SI-GaAs)-based Ag/SI–GaAs/Ag device. The device is subjected to the irradiation...
The process to decrease the dislocation density in 3-inch Fe-doped InP wafers is described. The crystal growth process is a conventional liquid encapsulated Czochralsky (LEC) but thermal shields have been added in order to decrease the thermal gradient in the growing crystal. The shape of these shields has been optimized with the help of numerical simulations of heat transfer and thermomechanical ...
This paper proposes a new three-dimensional (3D) photolithography technology for a high-resolution micropatterning process on a fiber substrate. A brief review on the lithography technology of the non-planar surface is also presented. The proposed technology mainly comprises the microfabrication of the 3D exposure module and the spray deposition of thin resist films on the fiber. The 3D exposure m...
The density and light-scattering intensity of oxygen precipitates in CZ silicon crystals are measured by IR light-scattering tomography. The numerical data clarified through the measurements are discussed in relation to the amount of precipitated oxygen. The results obtained here correspond well with the theoretical analysis that oxygen precipitates cause light to scatter. The information obtained...
Te-doped GaSb single crystals are studied by measuring Hall effect, infrared (IR) transmission and photoluminescence (PL) spectra. It is found that the n-type GaSb with IR transmittance can be obtained as high as 60% by the critical control of the Te-doping concentration and electrical compensation. The concentration of the native acceptor-associated defects is apparently low in the Te-doped GaSb ...
The development of SiC and GaN power semiconductor market The current state of SiC technology and market, and the development trend in the next few years. The SiC device market is promising. Sales of Schottky barrier diodes have matured and MOSFET shipments are expected to increase significantly over the next three years. According to Yole Développement analysts, SiC is very mature in terms of dio...
In this paper, using a fully-coupled, three-dimensional electro-thermal device simulator, we study the mechanism of efficiency degradation at high current operation in planar GaN-based light emitting diodes (LED). In particular, the improvement of the efficiency degradation using thicker conductive GaN substrates has been demonstrated. First, it is found that local Joule heating inside thin conduc...
X-ray topographic and chemical etching examination of Si:Ge single crystals containing 1.2 at% and 3.0 at% Ge, together with precise lattice parameter measurements, was performed. Diffraction contrasts in the form of concentric `quasi-circles' (striations), probably due to the non-uniform distribution of Ge atoms, were observed in projection topographs. The etching patterns reveale...
Contact Information
luna@powerwaywafer.compowerwaymaterial@gmail.com 
+86-592-5601 404
