The recent advances in epitaxial SiC films' growth on Si are overviewed. The basic classical methods currently used for SiC films' growth are discussed and their advantages and disadvantages are explored. The basic idea and the theoretical background for a new method of the synthesis of epitaxial SiC films on Si are given. It will be shown that the new method is significantly different from the cl...
It is still a great challenge for semiconductor based-devices to obtain a large magnetoresistance (MR) effect under a low magnetic field at room temperature. In this paper, the photoinduced MR effects under different intensities of illumination at room temperature are investigated in a semi-insulating gallium arsenide (SI-GaAs)-based Ag/SI–GaAs/Ag device. The device is subjected to the irradiation...
Ion beam irradiation has been examined as a method for creating nanoscale semiconductor pillar and cone structures, but has the drawback of inaccurate nanostructure placement. We report on a method for creating and templating nanoscale InAs spikes by focused ion beam (FIB) irradiation of both homoepitaxial InAs films and heteroepitaxial InAs on InP substrates. These 'nanospikes' are created as In ...
The development of SiC and GaN power semiconductor market The current state of SiC technology and market, and the development trend in the next few years. The SiC device market is promising. Sales of Schottky barrier diodes have matured and MOSFET shipments are expected to increase significantly over the next three years. According to Yole Développement analysts, SiC is very mature in terms of dio...
In this paper, using a fully-coupled, three-dimensional electro-thermal device simulator, we study the mechanism of efficiency degradation at high current operation in planar GaN-based light emitting diodes (LED). In particular, the improvement of the efficiency degradation using thicker conductive GaN substrates has been demonstrated. First, it is found that local Joule heating inside thin conduc...
We present a non-contact method for the determination of the thermal response time of temperature sensors embedded in wafers. In this method, a flash lamp illuminates a spot on the wafer in periodic pulses; the spot is on the opposite side from the sensor under test. The thermal time constant of the sensor is then obtained from measurement of its temporal response, together with a theoretical mode...
Orthogonal experiments of GaSb films growth on GaAs substrate have been designed and performed by using a low-pressure metal–organic chemical vapor deposition (LP-MOCVD) system. The crystallinities and microstructures of the produced films were comparatively analyzed to achieve the optimum growth parameters. It was demonstrated that the optimized GaSb thin film has a narrow full width at half maxi...
We have improved the efficiency of photoconductive antennas (PCAs) using low-temperature-grown GaAs (LT-GaAs). We found that the physical properties of LT-GaAs photoconductive layers greatly affect the generation and detection characteristics of terahertz (THz) waves. In THz generation, high photoexcited carrier mobility and the presence of a few As clusters in the LT-GaAs are two important factor...
Contact Information
luna@powerwaywafer.compowerwaymaterial@gmail.com 
+86-592-5601 404
